33
8.12 HDCP
TOP → ANALYSIS [ANALYZE] → DETAILS[F1] → more[SHIFT] →
more[SHIFT]→ HDCP[F3]
----------------------------------HDCP 表示画面-----------------------------------------------
This operation sequence is used to display the constants used during HDCP certification.
For details on the display, refer to the HDCP specifications.
8.13 (DDC Monitor)
TOP → ANALYSIS [ANALYZE] → DETAILS[F1] → more[SHIFT] →
more[SHIFT]→ DDC Monitor[F3]
----------------------------------DDC Monitor 表示画面-----------------------------------------------
This operation sequence enables details of the communication on the input HDMI DDC
line to be displayed.
9. Other functions
9.1 Hot plug function
The hot plug status can be changed by pressing the HOTPLUG button. For the
HOTPLUG button settings, refer to ??? on page ???.
9.2 Log function
10. Error table
11. Product specifications
12. Terms
To Previous Page
Loading...
