2-28 Chapter 2: BIOS setup
Hard Disk Power Down Mode [Suspend]
Allows you to select hard disk power down Mode.
Conguration options: [Disabled] [Standby] [Suspend]
Power On By Ring [Disabled]
This allows either settings of [Enabled] [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode.
Conguration options: [Disabled] [Enabled]
Power On By OnBoardLan [Disabled]
Allows you to enable or disable the onboard LAN to generate PME in
SoftOFF mode
Conguration options: [Disabled] [Enabled]
Power On By PME# [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCILAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Conguration options: [Disabled] [Enabled]
Power On By KBC [Enabled]
This parameter allows you to use specic keys on the keyboard to turn on
th system. When set to [enabled], the item Wake-up Key is enabled. This
feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Conguration options: [Disabled] [Enabled]
Wa ke- up Key[Any Ke y]
Appears only when Power On By KBC is set to [Enabled].
Conguration options: [Any key] [Specc Key]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Conguration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to [Enabled], the items RTC Alarm Date, RTC Alarm Hour, RTC
Alarm Minute, and RTC Alarm Second appear with set values.
Conguration options: [Disabled] [Enabled]
To Next Page
Loading...
Need help?
General
