2‑36
Chapter 2: Getting started
Chassis Fan 1/2 Profile [Standard]
This item appears only when you enable the Chassis Fan 1/2 Q‑Fan Control feature and
allows you to set the appropriate performance level of the chassis1/2 fan.
[Standard] Sets to [Standard] to make the chassis1/2 fan automatically adjust
depending on the chassis1/2 temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet chassis1/2 fan operation.
[Turbo] Sets to [Turbo] to achieve maximum chassis1/2 fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set Chassis1/2 Fan Prole to [Manual].
Chassis Fan 1/2 Upper Temperature [70]
Use the <+> and <‑> keys to adjust the upper limit of the Chassis1/2 temperature. The
values range from 40ºC to 75ºC.
Chassis Fan 1/2 Fan Max. Duty Cycle(%) [100]
Use the <+> and <‑> keys to adjust the maximum chassis1/2 fan duty cycle. The
values range from 60% to 100%. When the chassis1/2 temperature reaches the upper
limit, the chassis1/2 fan will operate at the maximum duty cycle.
Chassis Fan 1/2 Lower Temperature [40]
Displays the lower limit of the chassis1/2 temperature.
Chassis Fan 1/2 Fan Min. Duty Cycle(%) [60]
Use the <+> and <‑> keys to adjust the minimum chassis fan duty cycle. The values
range from 60% to 100%. When the chassis temperature is under 40ºC, the chassis
fan will operate at the minimum duty cycle.
2.6.6 Anti Surge Support [Disabled]
This item allows you to enable or disable the Anti Surge function. Conguration options:
[Disabled] [Enabled]
To Next Page
Loading...
