ASUS CUSL2-C User’s Manual 67
4. BIOS SETUP
4. BIOS SETUP
PCI Configuration
IRQ XX Reserved [No]
These fields indicate whether or not the displayed IRQ for each field is
being used by a specified device. The default value indicates that the dis-
played IRQ is not used. Configuration options: [No] [Yes]
PCI/PNP IRQ Resource Exclusion
USB Function [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. Set to [En-
abled] if you want to use USB devices. Configuration options: [Disabled]
[Enabled]
VGA BIOS Sequence [PCI/AGP]
If your computer has both PCI and AGP VGA controllers, this field allows
you to select which of the controllers will act as your primary graphics
controller. The default, [PCI/AGP], allows your PCI controller to take pre-
cedent when detected. [AGP/PCI] uses the AGP controller as your primary
controller. Configuration options: [PCI/AGP] [AGP/PCI]
To Next Page
Loading...
Need help?
General
