Asus F1A75-V PRO - Placement Direction; Screw Holes

2-4 Chapter 2: Hardware information
Chapter 2
2.2.3 Placement direction
When installing the motherboard, ensure that you place it into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis as indicated in
the image below.
2.2.4 Screw holes
Place nine screws into the holes indicated by circles to secure the motherboard to the
chassis.
DO NOT overtighten the screws! Doing so can damage the motherboard.
F1A75-V PRO
Place this side to wa rds
the rear of the chassis.