Asus F1A75-V PRO - Ai Overclock Tuner [Auto]

ASUS F1A75-V PRO 3-17
Chapter 3
Scroll down to display the following items:
Target CPU Speed : xxxxMHz
Displays the current CPU speed.
Target DRAM Speed : xxxxMHz
Displays the current DRAM speed.
3.5.1 Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking conguration options:
[Auto] Loads the optimal settings for the system.
[Manual] Allows you to individually set overclocking parameters.
[D.O.C.P.] Allows you to select a DRAM O.C. prole, and the related parameters will
be adjusted automatically.
APU Frequency [XXX]
This item appears only when you set the Ai Overclock Tuner item to [Manual]. Use the <+>
and <-> keys to adjust the value. You can also key in the desired value using the numeric
keypad. The values range from 90.0MHz to 300.0MHz.
DRAM O.C. Prole [DDR3-1600MHz 9-9-9-24 1.65V]
This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.]. and allows
you to select a DRAM O.C. prole, which applies different settings to DRAM frequency,
DRAM timing and DRAM voltage. Conguration options: [DDR3-1600MHz 9-9-9-24 1.65V]
[DDR3-1800MHz 9-9-9-24 1.65V] [DDR3-1866MHz 9-9-9-24 1.65V] [DDR3-2000MHz 9-9-
9-24 1.65V] [DDR3-2133MHz 9-9-9-24 1.65V] [DDR3-2200MHz 9-9-9-24 1.65V] [DDR3-
2400MHz 9-9-9-24 1.65V]
Version 2.00.1201. Copyright (C) 2011 American Megatrends, Inc.
CPU Load Line Calibration is dened by
AMD VRM spec and affects CPU voltage.
The CPU working voltage will decrease
proportionally to CPU loading. Higher
value could get higher voltage and good
overclocking performance but increase the
CPU and VRM thermal.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save ESC: Exit
DRAM Voltage 1.500V Auto
SB 1.1V Voltage 1.100V Auto
1.1Vsb Voltage 1.200V Auto
APU1.2V Voltage 1.200V Auto
VDDA Voltage 2.800V Auto
Digi + VRM
CPU Load Line Calibration Auto
CPU/NB Load Line Calibration Auto
CPU Current Capability 100%
CPU/NB Current Capability 100%
CPU Power Phase Control Standard
CPU Voltage Frequency Auto
VRM Spread Spectrum Disabled
CPU Power Duty Control T. Probe
APU Spread Spectrum Auto