Asus F1A75-V PRO - Page 97

ASUS F1A75-V PRO 4-5
Chapter 4
CPU Current Capability
CPU Current Capability provides wider total
power range for overclocking. A higher value
setting gets higher VRM power consumption
delivery.
A higher value brings a wider total power
range and extends the overclocking
frequency range simultaneously.
Suggestion: choose higher value
when overclocking or under high
CPU loading for extra power
support.
CPU Voltage Frequency
Switching frequency will affect the VRM
transient response and component thermal.
Enable Auto Spread Spectrum to enhance
system stability, or select VRM Fixed
Frequency Mode to assign a xed VRM
frequency.
Assign a high VRM frequency to increase
O.C. range or a low VRM frequency for
better system stability.
Do not remove the thermal module when switching to Manual mode. The thermal
conditions should be monitored.
CPU/NB Load Line Calibration
The behavior of the DRAM Controller is
decided by CPU/NB Load-Line. Set to a
higher value for system performance, or to a
lower value for better thermal solution.
• The actual performance boost
may vary depending on your
CPU and DRAM specication.
• Do not remove the thermal
module. The thermal conditions
should be monitored.