3-10
Chapter 3: BIOS Setup
Chapter 3
Creating RAID
TocreateRAID:
1. Press<F11>onyourkeyboardorclick
fromtheBIOSscreentoopen
EZTuningWizardscreen.
2. ClickRAID
thenclickNext.
EnsurethatyourHDDshavenoexistingRAIDvolumes.
EnsuretoconnectyourHDDstoIntel
®
SATAconnectors.
3. Selecttheportthatyouwanttosetto[RAID]mode,PCIEorSATA,thenclickNext.
4. SelectaMainCoolingSystemBOX cooler, Tower cooler, Water cooler,orI’m not
sure,thenclickNext.
5. AfterselectingtheMainCoolingSystem,clickNextthenclickYestostarttheOC
Tuning.