Asus MAXIMUS IX APEX - Page 77

ASUS MAXIMUS IX APEX
3-11
Chapter 3
5. AfterselectingthetypeofRAID,clickNextthenclickYestocontinuetheRAIDsetup.
6. AftertheRAIDsetupisdone,clickYestoexitthesetupthenclickOKtoresetyour
system.
YoucanonlyselectEasyBackup(RAID10)ifyouconnectfour(4)HDDs.
b. ForSuperSpeed,clickNextthenselectfromSuper Speed (RAID0)orSuper
Speed (RAID5).
a. ForEasyBackup,clickNextthenselectfromEasy Backup (RAID1)orEasy
Backup (RAID10).
4. SelectthetypeofstorageforyourRAID,Easy BackuporSuper Speed,thenclick
Next.