EasyManuals Logo

Asus P7P55D Deluxe - Motherboard - ATX User Manual

Asus P7P55D Deluxe - Motherboard - ATX
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
ASUS P7P55D Deluxe 2-43
Chapter 2
2.9 Starting up for the rst time
1. After making all the connections, replace the system case cover.
2. Be sure that all switches are off.
3. Connect the power cord to the power connector at the back of the system chassis.
4. Connect the power cord to a power outlet that is equipped with a surge protector.
5. Turn on the devices in the following order:
a. Monitor
b. External SCSI devices (starting with the last device on the chain)
c. System power
6. After applying power, the system power LED on the system front panel case lights up.
For systems with ATX power supplies, the system LED lights up when you press the
ATX power button. If your monitor complies with the “green” standards or if it has a
“power standby” feature, the monitor LED may light up or change from orange to green
after the system LED turns on.
The system then runs the power-on self tests or POST. While the tests are running, the
BIOS beeps (see the BIOS beep codes table below) or additional messages appear on
the screen. If you do not see anything within 30 seconds from the time you turned on
the power, the system may have failed a power-on test. Check the jumper settings and
connections or call your retailer for assistance.
7. At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the
instructions in Chapter 3.
BIOS Beep Description
One short beep VGA detected
Quick boot set to disabled
No keyboard detected
One continuous beep followed by two
short beeps then a pause (repeated)
No memory detected
One continuous beep followed by three
short beeps
No VGA detected
One continuous beep followed by four
short beeps
Hardware component failure
2.10 Turning off the computer
While the system is ON, pressing the power switch for less than four seconds puts the system
on sleep mode or soft-off mode, depending on the BIOS setting. Pressing the power switch
for more than four seconds lets the system enter the soft-off mode regardless of the BIOS
setting. Refer to section
3.7 Power Menu
in Chapter 3 for details.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus P7P55D Deluxe - Motherboard - ATX and is the answer not in the manual?

Asus P7P55D Deluxe - Motherboard - ATX Specifications

General IconGeneral
Form FactorATX
ChipsetIntel P55
CPU SocketLGA 1156
Max Processors Qty1
Memory Slots4
Max Memory16 GB
Memory TypeDDR3
Memory StandardDDR3 2200(O.C.)/1600/1333/1066
PCIe x16 Slots2
PCI Express x12
PCI Slots2
SATA 6Gb/sNo
RAID SupportYes
USB 2.0 Ports12
USB 3.0 PortsNo
Audio8-channel
Audio CodecVIA VT2020
LANGigabit Ethernet
Power Connector24-pin ATX

Related product manuals