Asus PhysX P1 - Verify PhysX Driver Installation

14
ASUS PhysX
TM
Installation Guide
English
3. Troubleshooting
Use the following tips if you experience problems during installation. Contact your
vendor for more advanced troubleshooting help.
Problem
Plug 4-pin Peripheral Power Cable into the card.
“ C o n n e c t t h e D e v i c e t o t h e C o m p u t e r ”
message appears during driver installation
4-pin Peripheral Power Cable is not plugged into the
card.
Cause
Solution
Problem
Follow the instruction in “Verifying the PhysX card”
on page 10.
I need to verify the ASUS PhysX card is
successfully installed
Cause
Solution
Follow the instruction in “Verifying the PhysX card
driver” on page 11.
Cause
Solution
I need to verify the ASUS PhysX device driver is
successfully installed
Problem
3.1 Problems and solutions table