4-12
Chapter 4: RAID Support
Chapter 4
4. A message appears, reminding you to insert the installation media containing the
driver of the RAID controller driver. If you have only one optical drive installed in your
system, eject the Windows OS installation disc and replace with the motherboard
Support DVD into the optical drive. Click Browse to continue.
5. Locate the driver in the corresponding folder of the Support DVD then click OK to
continue.
6. Select the RAID controller driver you need from the list and click Next.
7. When the system finishes loading the RAID driver, replace the motherboard Support
DVD with the Windows Server installation disc. Select the drive to install Windows and
click Next.
8. Setup then proceeds with the OS installation. Follow screen instructions to continue.
To Next Page
Loading...
