1-12
Chapter 1: Product Introduction
Chapter 1
1.1.8 Onboard LEDs
2. Q-Code LEDs
The Q-Code LED design provides you with a 2-digit error code that displays the
system status.
• The Q-Code LEDs provide the most probable cause of an error code as a starting
point for troubleshooting. The actual cause may vary from case to case.
• Please refer to the Q-Code table in the Appendix section for more details.
1. M.2 LEDs
The M.2 LED near the M.2 socket will light up when an SATA SSD device is detected.
To Next Page
Loading...
