Asus Pro WS X299 SAGE II - Installing Three SLI-Ready Graphics Cards

5-8
Chapter 5: Multiple GPU Support
Chapter 5
5.2.3 Installing three SLI-ready graphics cards
Refer to the documentation that came with your graphics card package to install the device
drivers.
To install three SLI-ready graphics cards:
1. Prepare three SLI-ready graphics
cards.
2. Insert the three graphics cards into the
PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots,
refer to Chapter 1 in this user manual
for locations of the PCIEX16 slots
recommended for multi-graphics card
installation.
3. Ensure that the cards are properly
seated on the slots.
4. Align and rmly insert the SLI
®
bridge connector to the goldngers on each graphics
card. Ensure that the connector is rmly in place.
5. Connect two independent auxiliary power sources from the power supply to the two
graphics cards separately.
6. Connect a VGA or a DVI cable to the graphics card.
Goldfingers
SLI
®
bridge