Asus Pro WS X299 SAGE II - Onboard Jumpers

ASUS Pro WS X299 SAGE II
1-11
Chapter 1
1.1.7 Onboard jumpers
1. CPU Over Voltage jumper
The CPU Over Voltage jumper allows you to set a higher CPU voltage for a exible
overclocking system, depending on the type of the installed CPU. To gain more CPU
voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage
setting, insert the jumper to pins 1-2.
2. U.2 LED SW jumper
The U.2 LED SW jumper allows you to select the LED mode for storage devices. Set
to pins 1-2 for NVMe device LED mode. Set to pins 2-3 for normal storage device LED
mode.