Asus Pro WS X299 SAGE II - Page 31

ASUS Pro WS X299 SAGE II
1-17
Chapter 1
5. Fan and Pump connectors
The Fan and Pump connectors allow you to connect fans or pumps to cool the
system.
• The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
• W_PUMP+ function support depends on water cooling device.
• Connect the fan of your water cooling kit to the AIO_PUMP connector.
• DO NOT forget to connect the fan cables to the fan connectors. Insufcient air
ow inside the system may damage the motherboard components. These are not
jumpers! Do not place jumper caps on the fan connectors!
• Ensure the cable is fully installed into the connector.
Header Max. Current Max. Power Default Speed Shared Control
CPU_FAN 1A 12W Q-Fan Controlled A
CPU_OPT 1A 12W Q-Fan Controlled A
CHA_FAN1 1A 12W Q-Fan Controlled -
CHA_FAN2 1A 12W Q-Fan Controlled -
AIO_PUMP 1A 12W Full-Speed -
W_PUMP+ 3A 36W Full-Speed -
M.2_FAN 1A 12W Q-Fan Controlled -