EasyManua.ls Logo

Asus Pro WS X299 SAGE II - Page 37

Asus Pro WS X299 SAGE II
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ASUS Pro WS X299 SAGE II
1-23
Chapter 1
13. AURA RGB LED connector
The AURA RGB LED connector allows you to connect RGB LED strips.
The AURA RGB LED connector supports 5050 RGB multi-color LED strips (12V/G/R/B),
with a maximum power rating of 2A (12V), and no longer than 2 m.
Before you install or remove any component, ensure that the power supply is switched off
or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.
Actual lighting and color will vary with LED strip.
If your LED strip does not light up, check if the RGB LED extension cable and the
RGB LED strip is connected in the correct orientation, and the 12V connector is
aligned with the 12V header on the motherboard.
The LED strip will only light up when the system is powered on.
The LED strip is purchased separately.

Table of Contents

Related product manuals