3-8
Chapter 3: General Instruction
• Main source and sub source are available as following table.
Sub source
HDMI-1 HDMI-2 DisplayPort USB Type-C
Main Source
HDMI-1 NA NA OK OK
HDMI-2 NA NA OK OK
DisplayPort
OK
OK NA
NA
USB Type-C
OK
OK NA
NA
7. Input Select
Select the input source from HDMI-1, HDMI-2, DisplayPort, USB
Type-C. Enable/Disable Auto Source Detection input signal.
Input Select
ProArt
Preset
HDMI-1
HDMI-2
DisplayPort
USB Type-C
Auto Source Detection
Standard Mode DisplayPort 3840x2160@60Hz