Asus ProArt PA279CV Series - Page 25

3-9
ASUS LCD Monitor PA279 Series
8. System Setup
System Setup
ON
Language
Power Indicator
Information
All Reset
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
System Setup
Adaptive-Sync
USB Setup
Power Saving
OSD Setup
QuickFit
DisplayPort Stream
Key Lock
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
• Adaptive-Sync: It can allow a Adaptive-Sync supported graphics source
to dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display
update.
1. *For supported GPUs, minimum PC system and driver
requirements, please contact the GPU manufactures.
2. To activate this function, you need to do the following: set
DisplayPort Stream to DisplayPort 1.2, turn off Rapid Rendering
Mode.
• USB Setup: Configures the USB Type C port setting. The USB
Setup parameter affects the output resolution only when the source is
connected to the USB Type C port. Due to the technological differences
between USB 2.0 and USB 3.1, THE maximum USB data throughput
(bandwidth and other related characteristics) varies and therefore
influences the maximum output resolution.