Asus ROG Front Base - Selecting an audio equalization mode; Adjusting the system volume; Understanding the Debug mode

16
Understanding the Debug mode
The debug mode provides instant information about the status of your system. It is
automatically activated, and only active, during the booting process.
In debug mode, the 2-digit error code of the motherboard’s Q-Code LED is directly
displayed on the device’s Mode/Status indicator in real-time during the bootup
process.
The debug mode automatically switches to the normal mode after a successful boot
and the system is in the Operating System (OS).
Selecting an audio equalization mode
The ROG Front Base has four audio equalization (EQ) modes specically designed
for gaming and a music mode for listening to your favorite audio les.
To select an audio EQ mode, press and hold the Selection knob until
is displayed on the Mode/Status Indicator then rotate the Selection knob to select a
mode.
Adjusting the system volume
To adjust the system volume, press the Selection knob repeatedly until
is displayed on the Mode/Status Indicator then rotate the knob to
adjust the volume level.
NOTE: Refer to your motherboard manual for the complete list of the 2-digit
error codes.