Asus ROG STRIX B450-E Gaming - Advanced BIOS Settings; AMD fTPM and CPU Configuration

ROG STRIX B450-E GAMING
3-15
Chapter 3
SVM Mode
This item allows you enable or disable CPU Virtualization.
Conguration options: [Disabled] [Enabled]
3.6.3 ROG Effects
The items in this menu allow you to congure the LEDs on your motherboard.
Onboard LED
This item allows you to enable all the onboard LEDs.
Conguration options: [Enabled] [Disabled]
3.6.5 SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
3.6.4 NB Configuration
The items in this menu allows you to congure the VGA devices.
IGFX Multi-Monitor
This item allows you to enable or disable Internal Graphics Device Multi-Monitor Support for
add-ons VGA devices.
Conguration options: [Disabled] [Enabled] [HybridGraphics]
Primary Video Device
This item allows you to select the Primary Video Device that BIOS will use as output.
Conguration options: [IGFX Video] [PCIE / PCI Video]
SATA Port Enable
This item allows you to enable or disable the SATA Device.
Conguration options: [Disabled] [Enabled]
SATA Mode
This item allows you to set the SATA conguration.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing
the drive to internally optimize the order of commands.
[RAID] Set to [RAID] when you want to create a RAID conguration from
the SATA hard disk drives.