3-9ASUS PG32UCDM Series OLED Monitor
• KVM: Switches USB downstream port to USB Type-C or USB
Type-B upstream port.
Computer 1
Computer 2
Step 1
Step 2
Step 3
Or
Computer 1
Computer 2
Step 1
Step 2
Step 3
• Type-C Bandwidth: Select USB Type-C with USB 2.0 or USB 3.2.
USB 3.2 is up to 3840 x 2160@144Hz when DSC support is ON.
• USB Hub: Set the USB Hub availability during standby mode.
This function is not available (set as On During Standby) when Aura Sync is
enabled.
• Keyboard Hotkey: Enables the keyboard hotkeys. The denition
for keyboard hotkeys are as below.
• Keyboard Hotkey1 (CTRL+ALT+Q): KVM switch & PIP
switch
• Keyboard Hotkey2 (CTRL+ALT+W): Customize setting
switch
• Keyboard Hotkey3 (CTRL+ALT+E): Pixel cleaning
•
This function is only available when your USB upstream port is connected
and keyboard is connected to monitor’s USB downstream port.
To Next Page
Loading...
