Asus RS300-E10-PS4 - Page 63

ASUS RS300-E10 Series
4-7
7. Smart Ride Through (SmaRT) setting (3-pin SMART_PSU1)
This jumper allows you to enable or disable the Smart Ride Through (SmaRT) function.
This feature is disabled by default. Set to pins 1-2 to enable it. When enabled, SmaRT
allows uninterrupted operation of the system during an AC loss event.
6. SATA DOM power setting (3-pin DOM1_PWR1, DOM1_PWR2)
This jumper allows you to congure the DOM power setting.
• DOM1_PWR1 corresponds to the SATA5 connector.
• DOM1_PWR2 corresponds to the SATA6 connector.
This jumper functions only when you install the ASUS ASMB9 management card.