Asus RS500A-E6/PS4 - Internal Features

Chapter 1: Product introduction1-6
1.6 Internal features
The barebone server includes the basic components as shown.
The barebone server does not include a oppy disk drive. Connect a USB oppy
disk drive to any of the USB ports on the front or rear panel if you need to use a
oppy disk.
*WARNING
HAZARDOUS MOVING PARTS
KEEP FINGERS AND OTHER BODY PARTS AWAY
1. PCI Express G2 x16 slot
Riser Card (G2 x16 link)
2. Power fans
3. ASUS KGNE-D16
server board
4. Power supply
5. System fan 1* - Connects
to CPU_FAN2 connector
6. System fan 2* - Connects
to FRNT_FAN1
connector
7. System fan 3* - Connects
to FRNT_FAN2
connector
8. System fan 4* - Connects
to FRNT_FAN3
connector
9. System fan 5* - Connects
to FRNT_FAN4
connector
10. SAS/SATAII backplane
11. Hot-Swap HDD tray 1 - Connects to SATA1 port (Port 0)
12. Hot-Swap HDD tray 2 - Connects to SATA2 port (Port 1)
13. Hot-Swap HDD tray 3 - Connects to SATA3 port (Port 2)
14. Hot-Swap HDD tray 4 - Connects to SATA4 port (Port 3)
15. Front I/O board (hidden)
16. Slim-type optical drive
9
7
16
15
14131211
10
5
6
4
3
2
1
8