7
Power switch
Press this switch to power on or off the system.
Reset button
This button resets or restores the system to its factory default settings.
10G WAN/LAN1 port
Connect a network cable into this port to establish 10G WAN/LAN1
connection.
2.5G WAN/LAN1 port
Connect a network cable into this port to establish 2.5G WAN/LAN1
connection.
2.5G LAN 2~4 ports
Connect network cables into these ports to establish 2.5G LAN
connection.
USB 3.2 Gen 1 port
Insert a USB 3.2 Gen 1 device such as a USB hard disk or a USB ash
drive into this port.
Insert your iPad’s USB cable into this port to charge your iPad.
NOTES:
• Use only the adapter that came with your package. Using
other adapters may damage the device.
• Specifications:
DC Power adapter DC Output: +12V with 3A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
To Next Page
Loading...
