Asus RT-BE92U - Setup Requirements

9
1.5 Setup Requirements
To set up your wireless network, you need a computer that
meets the following system requirements:
• Ethernet RJ-45 (LAN) port (10Base-T/100Base-
TX/1000BaseTX)
• IEEE 802.11a/b/g/n/ac/ax wireless capability
• An installed TCP/IP service
• Web browser such as Internet Explorer, Firefox, Safari, or
Google Chrome
NOTES:
• If your computer does not have built-in wireless capabilities,
you may install an IEEE 802.11a/b/g/n/ac/ax WLAN adapter
to your computer to connect to the network.
• With its tri-band technology, your wireless router supports
2.4GHz, 5GHz and 6GHz wireless signals simultaneously.
This allows you to do Internet-related activities such as
Internet surng or reading/writing e-mail messages using the
2.4GHz band while simultaneously streaming high-denition
audio/video les such as movies or music using the 5GHz
band.
• Some IEEE 802.11n devices that you want to connect to your
network may or may not support 5GHz band. Refer to the
device's manual for specications.
• The Ethernet RJ-45 cables that will be used to connect the
network devices should not exceed 100 meters.
IMPORTANT!
• Some wireless adapters might have connectivity issues to
802.11ax Wi-Fi APs.
• If you’re experiencing such issue, please ensure you update
the driver to the latest version. Check your manufacturer's
ofcial support site where software drivers, updates, and
other related information can be obtained.
• Realtek: https://www.realtek.com
• Mediatek: https://www.mediatek.com
• Intel: https://www.intel.com/