EasyManua.ls Logo

Asus RT-N10P - System Requirements; Initial Router Setup Steps

Asus RT-N10P
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
What you need
To set up your network, you need one or two computers that meet
the following system requirements:
Ethernet RJ-45 (LAN) port (10Base-T/100Base-TX)
IEEE 802.11b/g/n wireless capability
An installed TCP/IP service
Web browser such as Microsoft Internet Explorer, Mozilla
Firefox, Apple Safari, or Google Chrome
If your computer does not have built-in wireless capabilities,
install an IEEE 802.11b/g/n WLAN adapter to your computer
to connect to the network.
The Ethernet RJ-45 cables used to connect the network
devices should not exceed 100 meters.
Setting up your wireless router
Use a wired connection when setting up your wireless router
to avoid possible wireless setup issues.
Before setting up your ASUS wireless router, do the following:
If you are replacing an existing router, disconnect it from
your network.
Disconnect the cables/wires from your existing modem. If
your modem has a backup battery, remove it as well.
Reboot your computer (recommended).

Related product manuals