Asus SP97 - Page 19

ASUS SP97 / SP97-V User’s Manual 19
III. INSTALLATION
5. VGA Selection (VGA_SEL & VGA_SEL1) (with onboard VGA version only)
These jumpers allow you to turn the onboard VGA on or off. You need to disable
the onboard VGA to use your own add-on VGA expansion card.
R
Enable VGA
(Default)
VGA_SEL VGA_SEL1 VGA_INT
Disable VGA
VGA_SEL VGA_SEL1 VGA_INT
Onboard VGA
6. VGA Selection (VGA_INT) (with onboard VGA version only)
These jumpers allow you to set the VGA interrupt method. The default disables
the chipset’s internal interrupt routing. Some video capture cards may require
that the interrupt be assigned by the onboard chipset.
R
Interrupt by Chipset
(Video Capture Cards)
VGA_SEL VGA_SEL1 VGA_INT
Interrupt Disabled
(Default)
VGA_SEL VGA_SEL1 VGA_INT
Onboard VGA Interrupt
(Jumpers)
III. INSTALLATION