82 ASUS SP97-V User’s Manual
IX. SOFTWARE DRIVERS
(Windows 95)
IX. Software Drivers
2.3 Using “Display Modes”
1. Go to “Display Properties” Screen and you will find that “Display Modes” item
had been added.
2. First select “Display Modes” item and you may select desired resolution by
changing “Desktop area” pointer, desired color by changing “Color palette” value,
desired font size by changing “Font size”, and desired refresh rate by
changing “Refresh rate”.
3. After completing selection, select “OK” or “Apply” to complete the whole in-
stallation.
4. In “SiS 5597/5598 Settings” Screen, select “OK”.
5. Two cases happen :
a). You did not change “color” and/or “font size”.
1. “SiS 5597/5598 Settings” Screen appears again,
2. Select “Yes” and you may work on your selected mode now.
b). You changed “color” and/or “font size”.
1. System will reboot.
2. You may work on your selected mode now.
To Next Page
Loading...
