Asus TUF Z270 MARK 2 - Page 62

3-10
Chapter 3: BIOS Setup
Chapter 3
Creating RAID
To create RAID:
1. Press <F11> on your keyboard or click
from the BIOS screen to open
EZ Tuning Wizard screen.
2. ClickRAID
then click Next.
 EnsurethatyourHDDshavenoexistingRAIDvolumes.
 EnsuretoconnectyourHDDstoIntel
®
SATA connectors.
3. Checktheavailablestoragediskdrives,thenclickNext.
4. SelectaMainCoolingsystemBOX cooler, Tower cooler, Water cooler, or I’m not
sure, then click Next.
5. AfterselectingtheMainCoolingSystem,clickNext then click YestostarttheOC
Tuning.