Asus TUF Z270 MARK 2 - Page 63

ASUS TUF Z270 MARK 2
3-11
Chapter 3
5. After selecting the type of RAID, click Next then click Yes to continue the RAID setup.
6. After the RAID setup is done, click YestoexitthesetupthenclickOK to reset your
system.
YoucanonlyselectEasyBackup(RAID10)ifyouconnectfour(4)HDDs.
b. For Super Speed, click Next then select from Super Speed (RAID 0) or Super
Speed (RAID 5).
a. For Easy Backup, click Next then select from Easy Backup (RAID 1) or Easy
Backup (RAID 10).
4. Select the type of storage for your RAID, Easy Backup or Super Speed, then click
Next.