2-2 Chapter 2: Setup
2.3 Detaching the arm (for wall mount)
The detachable arm/base of this monitor is specially designed for wall mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Remove the back cover from the monitor. (Figure 1)
3. Use a screwdriver to remove the screws on the hinge (Figure 2), then remove
the stand.
(Figure 1) (Figure 2)
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• The wall mount kit (100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm)
To Next Page
Loading...
