Asus VS239H - Page 12

To Next Page

To Previous Page

Service Manual ASUS VS239H

3. Image

You can adjust the image Sharpness, Aspect Control, Position (VGA only), and Focus (VGA only) from this main

function.

 Sharpness: Adjust the picture sharpness. The adjusting range is from 0 to 100. (Only available for selecting

“Standard Mode” in Splendid menu)

 Trace Free: Speeds up the response time by Over Drive technology. The adjusting range is from lower 0 to faster

100. (Available for model VS229H-P, VS239H-P only).

 Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, or “Over Scan”. (The “Over Scan” ratio is only available

for HDMI input.).

 ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function. (ASCR: ASUS Smart Contrast

Ratio. Disabled at “Standard Mode”.)

 Position: Adjust the horizontal position (H-Position) and the vertical position (V-Position) of the image. The

adjusting range is from 0 to 100. (Only available for VGA input)

 Focus: Reduces Horizontal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock)

separately. The adjusting range is from 0 to 100. (Only available for VGA input)

4. Input Select

Related product manuals