1-2 Chapter 1: Product introduction
1.3 Monitor introduction
1 2 6 643 5
1. button:
• Selects a desired preset mode.
• Exits the OSD menu or goes back to the previous menu when the OSD
menu is active.
• Automatically adjusts the image to its optimized position, clock, and phase
by pressing this button for 2-4 seconds (for VGA mode only).
2.
• Decreases values or moves your selection left/down.
• QuickFit hotkey. (Please refer to 1.3.3 QuickFit function)
3. MENU button:
• Turns on the OSD menu. Enacts the selected OSD menu item.
To Next Page
Loading...
