Asus Z97-C - USB Configuration

3-38
Chapter 3: BIOS setup
Chapter 3
DMI Configuration
This item allows you to control various DMI (direct media interface) to run at PCI-E 2.0 speed.
DMI Gen 2 [Enabled]
Set this item to [Enabled] to run DMI at PCI-E 2.0 speed.
Conguration options: [Enabled] [Disabled]
NB PCI-E Configuration
This item allows you to congure the NB PCI Express settings.
PCI-EX16_1Link Speed [Auto]
This item allows you to congure the PCIEx16_1 speed.
Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
Memory Configuration
This item allows you to congure the memory conguration parameters.
Memory Scrambler [Enabled]
Set this item to [Enabled] to support high frequency DRAMs for a better stability.
Conguration options: [Enabled] [Disabled]
Memory Remap [Enabled]
Set this item to [Enabled] to support DRAM address remapping for 64-bit operating
systems.
Conguration options: [Enabled] [Disabled]
3.6.5 USB Configuration
The items in this menu allow you to change the USB-related features.
The Mass Storage Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.