Asus ZenScreen Touch MB16AMT - MB16 AMT Advanced Display Adjustments; Automatic calibration and monitor reset procedure; Optimal resolution;refresh rate by size; Updating graphics card driver for resolution

Picture or Text blur / Display Position or Resolution not correct
1. Automatic calibration (Auto Adjust): Press and hold the SPLENDID key
about 4 seconds for automatic correction
NOTE: i. "Auto Adjust" is valid only when the input is analog signal (VGA).
ii. Not every model has Auto Adjust hotkey.
2. Please adjust the current resolution to the correct setting and refresh rate according to different
sizes:
［4:3］17": 1280x1024/ 60Hz
［16:9］23"-46": 1920x1080/60Hz, 65": 1920x1080 / 120Hz
［16:10］20": 1680x1050/ 60Hz, 24": 1920x1200/ 60Hz
3. Update the graphic card driver:
My monitor cannot display proper resolution
4. Monitor Reset: Back to the initial value of display
Hold down the MENU key and select MENU > System Setup > Reset > select " Yes "