To Next PageTo Next Page
Need help?Do you have a question about the ASV RC-50 and is the answer not in the manual?
General| Brand | ASV |
|---|---|
| Model | RC-50 |
| Category | Compact Loader |
| Language | English |
Outlines the warranty duration for loaders, machines on rental, batteries, and parts.
Lists actions or situations that will void the machine's warranty.
Explains the meaning of Warning, Caution, and Note symbols used in the manual.
Details physical dimensions like height, clearance, and length for RC-50 and RC-60 models.
Provides track width and length on ground information for both models.
Lists shipping weight, operating weight, ground pressure, and contact area for the machines.
Covers engine model, type, displacement, horsepower, and torque for the RC-50/RC-60.
Details operating capacities, including tip loads and travel speed for the loaders.
Specifies the maximum flow and pressure for the auxiliary hydraulic pump.
Lists capacities for fuel tank, hydraulic tank, engine coolant, and oil.
Explains the location and importance of the machine's PIN for service and warranty.
Highlights essential safety instructions and dangers, such as keeping clear of raised lift arms.
Advises on preventing fires by managing flammable materials near hot components.
Stresses the importance of keeping the radiator and oil cooler clean to prevent overheating.
Lists daily or frequent checks like cleaning cooling systems and inspecting wiring.
Warns against going beneath unsecured lift arms and outlines safe procedures.
Defines operating capacity as a percentage of tipping load and mentions SAE standards.
Specifies the maximum GVW for the RC-50/RC-60 and warns about exceeding it.
Explains the function of the two hydraulic pilot joysticks for loader and drive functions.
Mentions alternative control configurations like "Case" style.
Describes how the throttle affects engine RPM for different operational needs.
Identifies various gauges and switches on the dash panel, including lights and indicators.
Explains the meaning of specific warning lights like battery voltage and temperature warnings.
Provides a caution for engine coolant, oil pressure, and hydraulic oil temperature warnings.
Outlines essential checks before starting the machine, like track tension and fluid levels.
Details the step-by-step process for starting the engine safely.
Provides guidelines and techniques for safe operation on inclines, respecting the 15-degree limit.
Explains the procedure for fastening and securing attachments using the manual quick-attach system.
Describes the operation of the hydraulic quick-attach mechanism for the RC-60 model.
Explains the self-leveling feature that maintains attachment position during lift cycles.
Details how to engage intermittent and continuous hydraulic flow for attachments.
Explains how joystick buttons control attachments requiring electrical input.
Outlines the steps for engaging and disengaging the lift arm brace for safety.
Provides intervals and steps for changing engine oil and filter, including oil specifications.
Details the procedure and precautions for changing hydraulic fluid and filter.
Explains the process and importance of changing the fuel filter.
Describes the function of the water separator and how to drain collected water.
Advises on cleaning undercarriage assemblies to prevent wear, especially in harsh conditions.
Explains the importance of track tension and the procedure for adjusting it.
Provides a method to check track tension and deflection using a straight edge and weight.
Covers inspection and replacement of drive sprocket rollers to minimize friction and wear.
Details cleaning and replacement procedures for the primary and secondary air cleaner elements.
Indicates the location of the fuse box in the engine compartment.
Illustrates and lists the locations of daily grease fittings on the machine.
Explains the importance of clean cooling systems and the procedure for cleaning them.
Advises on periodic cleaning of the chassis and engine area for safe operation.
Recommends ASV Posi-Lube 10W30 Heavy Duty Engine Oil for the machine.
Specifies ASV Posi-Lube Premium All Season MV Hydraulic Oil for optimal performance.
Recommends ASV Posi-Lube Multi-Purpose EP Lithium Grease for lubrication points.
Suggests ASV Posi-Lube Long-Life 50/50 Antifreeze/Coolant for the cooling system.
Advises using ASV Posi-Lube Undercarriage Wheel Bearing Lubricant.
