EasyManuals Logo

Atag CS4511D User Manual

Atag CS4511D
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
EN 18
Progress mode
Left side on the screen, the temperature is displayed (if the set
temperature is not reached, the temperature will switch between
cavity temp (grey) and set temp (white)). If the set temperature is
reached a pop-up will appear ‘set temperature is reached’.
Right side on the screen, the time (counting down) or the progress
time (counting up if no time was set) is displayed. Next to the
cooking time you can see the finishing time.
210
°C
14:30
0:40
HOT AIR + BOTTOM
15:10
If preheating is chosen, the progress mode will first show the
preheating display (preheating in the feedback bar and the
preheating icon). All settings are displayed only the colours are
switched. The cavity temperature is white and the chosen settings
are grey. If the set temperature is reached, a pop-up will appear:
‘Set temperature is reached. Insert dish’.
210
°C
14:30
0:40
HOT AIR + BOTTOM
15:10
Finish display
When the timer is finished, the ‘finish display’ will appear. Now it is
possible to:
Stop the progress.
Add extra time.
Gratin (if applicable).
Save as favourite.
FINISH l ENJOY 14:30
Stop the progress
1. Press the confirm key.
The finish display will be closed and the standby screen will be
shown.
If there is no action within 10 minutes, the display will switch to
standby mode.
OPERATION

Other manuals for Atag CS4511D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag CS4511D and is the answer not in the manual?

Atag CS4511D Specifications

General IconGeneral
BrandAtag
ModelCS4511D
CategoryOven
LanguageEnglish

Related product manuals