EN 38
6. Select the desired function, set the temperature and time.
7. Save the stage and return to the stage cooking overview by
pressing the confirm key.
▷ If the stop key is pressed the setting will be cancelled and the
display will turn to the previous display.
8. If desired, add a third stage. Repeat steps 4, 5, 6 and 7.
9. After confirmation, the display will show the set stages, with an edit
and delete icon.
10. If all stages are set according to your wishes, then return to the
oven setting screen. Press the ‘plus key’ to close the plus menu.
The display will show the normal oven setting screen with the
settings of the first stage (stage 1 icon white).
11. Start the process by pressing the confirm key.
▷ If the stop key is pressed, the stage cooking menu will be closed
and the oven will return to the normal mode.
Go to manual cooking
• In the manual cooking mode, a standard program from the
‘Programs and favorites’ function can be chosen and edited as in
‘Stage cooking’ mode.
• By selecting the manual function in the plus menu, a popup will
appear: ‘Switch to oven mode?’. After confirmation the display will
switch to the stage cooking mode if the selected program has
more stages.
Programs and Favourites
Automatic programs
• You can use ‘automatic programs’ for baking and roasting by
selecting a dish from a list of pre-programmed dishes. First select
the type of dish and then the dish itself from the available list.
• All the program categories have a picture. When a dish is selected,
the program settings will appear. The name of the dish and and the
name of the active selection are shown in the text bar.
• In the settings, first a picture of the dish is visible (not editable),
the weight (depending on the dish) (if it is editable), the intensity
(not always editable) and the cooking time. If necessary, adjust the
intensity and/or the weight.
USE
To Next Page
Loading...
Need help?
General
