EasyManuals Logo

Atag CS4511D User Manual

Atag CS4511D
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
EN 41
CLEANING
Cleaning the appliance
Clean the appliance regularly to prevent fat and food particles from
accumulating, especially on the surfaces of the interior and the exterior,
the door and the seal.
Activate the child lock (to prevent that the appliance is switched on
accidentally).
Clean the exterior surfaces with a soft cloth and warm soapy water.
Next wipe with a clean, damp cloth and dry the surfaces.
Remove splashes and stains on the interior surfaces with a
cloth and soapy water.
Next wipe with a clean, damp cloth and dry the surfaces.
Attention: Make sure that no water enters the vents.
Never use abrasive cleaning materials or chemical solvents.
Always make sure that the seal of the door is clean. This
prevents accumulation of dirt and allows you to close the door
properly.
Steam clean
With the steam clean function and a damp cloth, you can easily remove
grease and dirt from the oven walls.
Using steam clean
Only use steam clean when the oven has cooled down fully. It is more
difficult to remove dirt and grease if the oven is hot.
The steam clean program takes 30 minutes.
Food particles on the enamel walls will be sufficiently soaked after
30 minutes so that they can be removed with a damp cloth.
1. Remove all accessories from the oven.
2. Select the ‘Steam clean’ function
3. Press the confirm button to start steam clean.
Please note: Do not open the door during the cleaning process.

Other manuals for Atag CS4511D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag CS4511D and is the answer not in the manual?

Atag CS4511D Specifications

General IconGeneral
BrandAtag
ModelCS4511D
CategoryOven
LanguageEnglish

Related product manuals