Atag CS4574M User Manual

EN 59
Clicking sounds can be heard when the oven is working, particularly
in the defrost setting.
• This is normal.
The circuit breaker switches off regularly.
• Consult a service technician.
The display gives an error code, ERROR XX ...
(XX indicates the number of the error).
• There is a fault in the electronic module. Disconnect the appliance
from the power supply for a few minutes. Then reconnect it and set
the current time.
• Consult a service technician if the error persists.
Storing and repairing the oven
Repairs should only be performed by a qualified service technician.
If maintenance is required, then remove the mains plug from the socket
and contact the ATAG customer service.
Have the following information to hand when you call:
• The model number and serial number (stated on the inside of the
oven door)
• Warranty details
• A clear description of the problem
Choose a clean, dry place if you have to store the oven temporarily,
as dust and moisture can damage the appliance.
SOLVING PROBLEMS

Atag CS4574M Specifications

General

Connected load	3400 W
Energy consumption (conventional)	0.82 kWh
Energy consumption (forced convection)	0.62 kWh
Oven size	Medium
Oven type	Electric
Cleaning type	Steam
Number of ovens	1
Convection cooking	Yes
Oven thermostat range	40 - 230 °C
Total oven(s) interior capacity	51 L
Control type	Touch
Display type	TFT
Product color	Black
Appliance placement	Built-in
Timer type	Digital

Weight and Dimensions

Depth	547 mm
Width	598 mm
Height	456 mm
Installation compartment depth	550 mm
Installation compartment width	560 mm
Installation compartment height	460 mm