Atag CS4574M User Manual

EN 19
USE
Oven function
Use the oven function menu to cook dishes using, for instance, hot air,
bottom heat and grill.
Hot air
PROGRAMS
10
:
15
180
°C
• Various oven functions can be selected.
• A temperature and a cooking time can be set for each oven function.
• Plus menu functions such as fast preheat, stage cooking and
delayed start can also be selected. Tap on the plus symbol for this.
See the ‘Using the ‘Plus’ menu’ chapter.
Using an oven function
Select the oven function appropriate for the meal you are cooking.
Consult the Functions table for this. You can also consult the info tab.
Tap on the tab at the bottom of the display to request more information
about the selected function.
1. Switch on the oven using the ‘On/Off’ button.
2. Place the dish in the oven.
3. Tap ‘OVEN’ to open the oven function menu.
4. Select an oven function (see ‘Function-setting display’ chapter).
5. Select a temperature (see ‘Function-setting display’ chapter).
6. Tap the ‘cooking time’ symbol and select a cooking time (see
‘Function-setting display’ chapter).
Cooking can also be started without a cooking time being set.
You should then skip step 6.
7. Select any additional settings using the ‘Plus’ menu (for example
fast preheat).
8. Start cooking the dish using the confirm button.

Atag CS4574M Specifications

General

Connected load	3400 W
Energy consumption (conventional)	0.82 kWh
Energy consumption (forced convection)	0.62 kWh
Oven size	Medium
Oven type	Electric
Cleaning type	Steam
Number of ovens	1
Convection cooking	Yes
Oven thermostat range	40 - 230 °C
Total oven(s) interior capacity	51 L
Control type	Touch
Display type	TFT
Product color	Black
Appliance placement	Built-in
Timer type	Digital

Weight and Dimensions

Depth	547 mm
Width	598 mm
Height	456 mm
Installation compartment depth	550 mm
Installation compartment width	560 mm
Installation compartment height	460 mm