Atag CS4574M User Manual

EN 41
5. Confirm the setting using the confirm button.
A small symbol will appear below the plus symbol indicating the
selected number of steam cycles. The symbol (and the circle on the
outer circle) changes colour during the steam cycle.
6. Start cooking using the confirm button.
165
23
:
54
10
:
45
°C
180
°C
10 21
Small symbol indicating Add steam (1-3X) is activated
Add steam
Add steam can be selected during cooking (after starting a function).
1 steam cycle will start immediately.
1. During cooking of a dish (using an oven function) tap the plus symbol
to open the ‘Plus’ menu.
2. Tap on ‘Add steam’ to start a steam cycle.
A steam cycle will start immediately. A small symbol will appear
below the plus symbol to indicate that the steam cycle has started.
The symbol will disappear when the steam cycle ends. Another
steam cycle can then be started.
Delayed start
Use the ‘delayed start’ function to start cooking at a later time.
The delayed start function can only be selected via the ‘Plus’ menu in a
function. See the ‘Using the ‘Plus’ menu’ chapter.
Setting a delayed start time
1. Select a function, temperature and set a cooking time if necessary
(see ‘Function-setting display’ chapter).
A delayed start time can also be set without setting a cooking time.
USE

Atag CS4574M Specifications

General

Connected load	3400 W
Energy consumption (conventional)	0.82 kWh
Energy consumption (forced convection)	0.62 kWh
Oven size	Medium
Oven type	Electric
Cleaning type	Steam
Number of ovens	1
Convection cooking	Yes
Oven thermostat range	40 - 230 °C
Total oven(s) interior capacity	51 L
Control type	Touch
Display type	TFT
Product color	Black
Appliance placement	Built-in
Timer type	Digital

Weight and Dimensions

Depth	547 mm
Width	598 mm
Height	456 mm
Installation compartment depth	550 mm
Installation compartment width	560 mm
Installation compartment height	460 mm