GB 16
GB 17
INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS
Attachment points for mounting brackets
readed hole /screw / worktop
in worktops
ick worktops
Building in Building in
If the connecting cable is damaged, it may only be replaced by the
manufacturer, the manufacturer’s service organisation or equivalently
qualified persons, in order to avoid dangerous situations.
Preparing the hob
Fit the elbow supplied on the appliance’s gas connection.
1/2” ISO 228 (straight)
1/2” ISO 10226-1 (conical)
Sealing ring
Only for France
1/2” ISO 228 (straight)
1/2” ISO 2280 (straight)
Sealing ring
Cut opening in worktop
Saw the opening in the worktop. is should be done very U
accurately (see building in dimensions).
If the woodtop is made of treated wood, then coat the sawn U
surfaces of the top with sealing varnish, to prevent moisture
causing the top to swell.
To Next Page
Loading...
