Atag HI06471E - Settings; Setting the Audio Signal; Setting the Brightness

EN 23
SETTINGS
Setting the audio signal
1. Touch the menu key.
▷ The menu options are displayed.
2. Touch the slide control at the position of the loudspeaker symbol.
▷ The slide control shows the loudness setting.
3. Set the desired loudness setting with the slide control.
B
2
B
2
B
2
4. Touch the menu key to confirm.
Setting the brightness
1. Touch the menu key.
▷ The menu options are displayed.
2. Touch the slide control at the position of the brightness symbol.
▷ The slide control shows the brightness level.
3. Set the desired brightness with the slide control.
B
2
B
2
B
2
4. Touch the menu key to confirm.