Atag HI271D User Manual

GB 7
operation
switching on
introductie
The induction hob is fitted with a residual heat indicator, 3
preference settings, a timer for the rear cooking zones, a
childproof lock and an automatic cooking-time limiter. On this
page and the following ones, you can read how to use these
facilities.
switching on
1 Put a pan on a cooking zone.
2 Press the on/off button.
The green light next to the on/off button lights up.
setting the power level
1 Press the arrow button.
The hob goes directly to setting 3.
The lights in the display show the setting selected. You can
see which setting to select in the cooking tables on pages 12
and 13.
quick-selector button
1 Press the quick-selector button.
The hob goes directly to setting 6, 10 or 12.
2 Choose a higher or lower setting by pressing the arrow
buttons.
The setting selected is displayed continuously if there is a
pan on the cooking zone.
The lights blink if there is no pan on the cooking zone.
switching off
Press the on/off switch again.
The cooking zone switches off. The residual-heat indicator
will continue to indicate that the zone is hot if it still is.
lower higher
on/off button
quick-selector
buttons
Use the correct pan.
See the "pans"
section on pages 18
and 19.
safety
what you should pay attention to
Do not use aluminium foil, such as the trays from ready-made
meals, for cooking food in.
If aluminium foil melts on the cooking surface, it cannot be
removed.
Grains of sand may cause scratches which cannot be
removed.
• Only put pans with a clean base on the cooking surface.
• Always pick pans up to move them.
• Do not use the hob as a worktop.
GB 6
Always pick pans up;
never slide them.
6
10
12
6
10
12
6
10
12
6
10
12
6
10
12
6
10
12
6
10
12
6
10
12

Atag HI271D Specifications

General

Brand	Atag
Model	HI271D
Category	Hob
Language	English