Atag i28C Technical Guide

RESET
BACK OK
19°25/07/18 09:00
80°60°
ECO AUTO
Press OK to enter Menu
1.5 bar
From the controller Home screen,
press OK.
1
Turn the selector wheel to highlight
Screen Settings. Press OK.
3
Screen shown Boiler base.
6
Boiler base is highlighted. Press OK.
Press BACK button until you get back
to the home screen.
5
Screen shown. Boiler complete.
8
Turn the selector wheel to highlight
Complete Menu. Press OK.
2
Time program / Manual
Summer / Winter / OFF
Complete Menu
Turn the selector wheel to highlight
Home screen. Press OK.
4
Language
Time & Date
Home screen
Zone to be set by display
Stand-by timing
Turn the selector wheel to highlight
Boiler complete. Press OK. Press BACK
button until you get back to the home
screen.
7
Boiler base
Boiler complete
25/07/18 09:00
70°45°
ECO AUTO
Press Ok to enter Menu
1.4 bar
00 02 04 06 08 10 12 14 16 18 20 22 24
23.6º
1
25/07/18 09:00
70°45°
ECO AUTO
Press Ok to enter Menu
1.4 bar
Boiler base
Boiler complete
Home screen settings
There are two screen settings that can be chosen ‘Boiler base’ & ‘Boiler complete’.
CH Settings
DHW Settings
Screen Settings
38

Atag i28C Specifications

General

Brand	Atag
Model	i28C
Category	Boiler
Language	English