Full Service
For reasons of safety and economy, it is recommended that the boiler is serviced annually. Servicing must be
performed by a competent person in accordance with BS 7967-4.
After servicing, complete the relevant Service Interval Record section of the Benchmark Checklist, located on the
inside back page of the installation & servicing instructions.
Where a full service is required the following steps must be followed:
Carry out the actions as described in the interim service section.
Fan unit and burner cassette
• Remove the Velcro from the silencer and remove the silencer (1)
• Unscrew the coupling (2) of the gas block and the coupling on the venturi (3) and remove the gas line (4)
1
4
3
2
1
58
To Next Page
Loading...
Need help?
General
