10
4.4 Reset-button
The reset button allows the boiler to restart if an error has
occurred.
In case of an error the
symbol is displayed with a
XXX code.
In other cases the reset button does not function and will
not respond to operation.
See chapter XX for a brief overview of error codes.
4.5 Frost protection
The iC and iS-Range boiler control is from standard provided with a boiler frost
protection.
The frost protection is switched on automatically when the
symbol in the
display is ashing and the pump is running.
In case there is danger of frost of the rest of the heating
system the frost protection can be switched on manually
by pressing the two - buttons for 6 seconds.
The
symbol is constant in the display and the pump is
running constantly.
Press both - buttons again for 6 seconds to switch back to
automatic.
To Next Page
Loading...
