What to do if Atag IG9571MBA shows error code F00?
If the Atag hob displays error code F00, it indicates that the control panel is either dirty or has water on it. To resolve this, clean the control panel thoroughly.
What to do if Atag Hob shows error code F8 or F08?
If the Atag hob displays error codes from F8 and F08, this indicates that the appliance is overheated. Allow the appliance to cool down completely, and then restart it on a lower setting.
What does error code FAN mean on Atag IG9571MBA?
If the Atag hob displays error code FAN, it means the air circulation is not sufficient. Ensure that the venting holes under the cooking plate are not blocked and are open to allow proper air circulation.
What does error code F7 mean on Atag Hob?
If the Atag hob displays error code F7, the ambient temperature is not optimal. Please switch off all heat sources near the cooking plate to allow it to cool down.
What does error code F99 mean on Atag IG9571MBA?
If the Atag hob displays error code F99, it indicates that you have pressed two or more buttons simultaneously. Ensure that you only press one button at a time when operating the hob.
Why does my Atag IG9571MBA Hob have error code F9 and/or continuous beep?
If the Atag hob displays error code F9 and/or you hear a continuous beep, it's likely that the appliance has been connected incorrectly, or the mains voltage is too high. Have your connection checked and changed by a qualified technician.
Why does the fuse blow when I switch on my Atag IG9571MBA?
If a fuse blows as soon as the Atag hob is switched on, it suggests that the hob has been incorrectly connected. Check the electrical connections to ensure they are properly configured.
Why does my Atag IG9571MBA Hob display 'br'?
If 'br' appears in the display of your Atag hob and the touch controls are not working, the bridge function is likely activated. Deactivate the bridge function.
General| Type | Gas Hob |
|---|---|
| Number of Cooking Zones/Burners | 5 |
| Width | 90 cm |
| Dimensions (W x D) | 900 x 520 mm |
| Material | Stainless Steel |
| Ignition Type | Automatic |
| Safety Features | Flame failure device |
| Control Type | Knobs |
To Next Page
